How to Solve WiFi Speed and Connection Problems in this COVID-19 Lockdown

We’ve grown so familiar with Wi-Fi being readily available for taking note of music, streaming our favourite shows, and allowing us to figure from home, that we rarely consider about being connected until we’re suddenly without Wi-Fi.

A loss of connection is disruptive to a daily routine, but most connection issues are easy to repair , so you'll get reconnected relatively quickly. When your Wi-Fi goes down, you'll restore access on your own by troubleshooting a number of these common problems.

Slow or no internet access in certain rooms

Wi-Fi is radio waves, meaning your router broadcasts altogether directions from a central location. If your router is during a far corner of your house, then you’re covering an excellent deal of the surface world unnecessarily. If you'll , move your router to a more centralized location. The closer you'll put your router to the middle of your coverage area, the higher reception are going to be throughout your house.
If you've got external antennas, you'll try adjusting those too. Alternating between fully vertical and fully horizontal positions can help reach in multiple directions.

If you reside in an apartment house , other routers could be interfering with yours. Free software like NetSpot on Mac and Windows (and Android) or Wi-Fi Analyzer for Android, can show you each wireless network nearby, and what channel they’re using. If your router overlaps with nearby networks especially rooms, consider switching to a less congested channel.

If none of that helps, your home could be an excessive amount of for one router to handle. Consider purchasing a wireless repeater or fixing an old router to function one to increase the range of your main router.

Slow internet everywhere

If your Wi-Fi speed is slow regardless of where you're , try plugging a laptop into your modem directly and test your internet speed employing a site like If speeds are still down, the matter is probably going together with your Internet connection, not your router. Contact your ISP.
If that’s not the difficulty , it might be that your current wireless channel is overcrowded by your devices, or by those of other nearby networks. Consider changing the channel on your router in your router settings. Each router brand does that a touch different though.

If that doesn’t help, performing a factory reset on your router and setting it up again may help. On most routers, there’s a “Reset” button which you'll hold down with a paperclip. Do so for 30 seconds and therefore the router should default from factory settings. Use our guide to fixing a wireless router to urge everything properly configured, and see if that helps.

If none of that works and your internet is ok on a wired connection, your router could be dying. Consider buying a replacement one: Here are the simplest routers we all know of. If the router seems fine, then it'd instead be your modem, which could suffer connectivity issues if it’s on its answer .

One device can’t connect with the Wi-Fi

Sometimes you run into a problem with one particular device. It’s probably just a momentary issue. Try turning off the Wi-Fi on your device, then re-enabling it. If that doesn’t work, do an equivalent together with your router by unplugging it then plugging it back in 30 seconds later.
If that doesn’t help, or if the matter re-occurs, consider deleting your current network from the list of saved networks on your device, then re-connect again.

If you’re running Windows 10, look for Wifi troubleshooting, and open the result, Identify and repair network issues. which will undergo a series of diagnostics which will restore connectivity. On MacOS, you'll run Wireless Diagnostics. Hold the choices key and click on the AirPort (Wi-Fi) icon on the menu bar. Find Open Wireless Diagnostics, then follow the on-screen instructions.

If none of that works, consider rebooting the device.

Nothing can connect with Wi-Fi

If you can’t hook up with your Wi-Fi in the least , plug your laptop into the router directly using an coaxial cable , and see if you'll connect that way. If that works, your Wi-Fi is that the problem — but if it doesn’t, then your internet could also be down altogether. therein case, you’ll want to contact your ISP.
Resetting your router can fix a myriad of issues and an inability to attach is one among them. Press the push button on the rear of the router with a paperclip for 30 seconds and therefore the router should default to factory settings. Use our guide to fixing a wireless router to urge everything properly configured.

If that’s no use, you'll got to consider buying a replacement router.

Connections drop randomly times

Is there some kind of pattern? Do connections drop whenever you employ the microwave? it's going to sound weird, but some routers have trouble with this, especially on the two .5GHz frequency or if you’re using an older microwave with shield problems.

It might be that you’re experiencing interference from other networks or devices. If your neighbors are heavy Wi-Fi users at a specific time every day , this might be slowing you down. Changing your router’s channel might help. you'll use NetSpot on Mac and Windows and Wi-Fi Analyzer for Android to point out you each wireless network nearby. If yours overlaps with nearby networks switching to a less congested channel in your router settings can help.

The network connects, but there’s no internet access

It might sound sort of a tired tip, but try resetting your modem by unplugging it and plugging it back in. If that doesn’t work, try also resetting your router an equivalent way, assuming it’s a separate device.

Connect a laptop or desktop to your router with an coaxial cable (these are the simplest ones). If this works, then the router has a drag , and should got to be reset. If there’s still no internet, though, your may have an outage. Contact your ISP.

Router crashes regularly and only restarting it helps

If your router must be restarted regularly, consider giving it a full reset. On most routers, you’ll find a “Reset” button which you'll hold down with a paperclip. Do so for 30 seconds and therefore the router should default from factory settings. Use our guide to fixing a wireless router to urge everything properly configured.

Post a comment